back to AMGBA website home page or AMGBA Photo Gallery or AMGBA Club Blog
Subscribe in a reader


Join or renew today and receive a free t-shirt or tech CD, see details in the join the club section at www.mgclub.org!

Author Topic: Help finding somebody to reamout the bushings for new king pins  (Read 1857 times)

0 Members and 1 Guest are viewing this topic.

may17

  • Message Board Member not current AMGBA Club Member
  • **
  • Posts: 2
Located in Wisconsin north of Milwaukee about 50 miles Project started as a steering boot replacement and turned into a  now that I am here I may as well ? Adding new A arms bushings, wheel bearings etc.  My king pins and bushings are worn and I have a new set of king pins and bushings. I need somebody that can ream the bushings properly. Anybody have any ideas, I know I can buy a new reamer but this is a one time project I hope. Jed Krieger, ironwingforge@Gmail.com or 262- 689- 9065 summer is almost here and my baby does not work.

june2016

  • Message Board Member not current AMGBA Club Member
  • **
  • Posts: 4
Re: Help finding somebody to reamout the bushings for new king pins
« Reply #1 on: May 10, 2016, 09:29:02 PM »
We just did the same! Find a good machinist to do the kingpins. The upshot is that you will a completely different car once you've gotten this out of the way. You can also buy a machined set, but they are considerably more expensive.

Jenna Lookner


 

   back to AMGBA website home page or AMGBA Photo Gallery or AMGBA Club Blog