back to AMGBA website home page or AMGBA Photo Gallery or AMGBA Club Blog
Subscribe in a reader


Join or renew today and receive a free t-shirt or tech CD, see details in the join the club section at www.mgclub.org!

Author Topic: Window Removal  (Read 106 times)

0 Members and 1 Guest are viewing this topic.

september2018

  • An AMGBA Club Member
  • ***
  • Posts: 17
Window Removal
« on: August 22, 2018, 08:26:54 PM »
I'm putting the doors back together and have forgotten how the windows came out. What is the procedure to reinstalling the glass? It looks like the vent window assembly is last to go in?
Noel Tetrev

JohnTwist

  • AMGBA Club Tech Staff
  • ****
  • Posts: 37
    • University Motors
Re: Window Removal
« Reply #1 on: August 22, 2018, 08:33:32 PM »
Drop the regulator assembly into the door first.  Then fit the vent window.
Attach the regulator assembly loosely.  Roll the glass onto the bottom track rollers.  Then install the rear track.  Then tighten up the regulator.

Finally adjust the rear track so the window rolls up and down without binding or excessive free play.  The first door will take three hours.  The second about half a hour.  The learning curve is fast.

Hope this helps!

John Twist
Safety Fast!
SAFETY FAST!
John H Twist
University Motors Online
100 East Beltline Avenue SE
Grand Rapids, MI  49506

Office:  616-855-1684
Cell:  616-307-6737

johntwist@universitymotorsltd.com
www.universitymotorsltd.com


 

   back to AMGBA website home page or AMGBA Photo Gallery or AMGBA Club Blog