back to AMGBA website home page or AMGBA Photo Gallery or AMGBA Club Blog
Subscribe in a reader


Join or renew today and receive a free t-shirt or tech CD, see details in the join the club section at www.mgclub.org!

Author Topic: Clutch Adjustment  (Read 6653 times)

0 Members and 1 Guest are viewing this topic.

august2007

  • Message Board Member not current AMGBA Club Member
  • **
  • Posts: 9
Clutch Adjustment
« on: July 25, 2007, 02:31:33 PM »
The clutch pedal on my 1979 must be depress all the way to the floor in order to shift smoothly.
The entire clutch was replaced i.e. pressure plate, throwout bearing, slave and master and hoses about 1000 miles ago by an MG shop. Is there an adjustment at the clutch master cylinder or is the clutch non- adjustable? ??? ???
Thanks,
TOM 

Art

  • chfwrench
  • AMGBA Club Tech Staff
  • ****
  • Posts: 246
  • Memberhsip Number (if known):: 91-10014
  • MG information: '73 red B roadster
Re: Clutch Adjustment
« Reply #1 on: March 19, 2008, 11:18:54 PM »
Hi Tom,

 Sorry, the clutch is not adjustable.  I would check all the fluid levels and connections for any leaks or air getting into the hydraulic system.  Try bleeding the system again to see if there's any improvement.

Also, if the master and/or slave cylinders were rebuilt as opposed to replaced, even if done professionally (there's a reason none of the catalogs offer rebuilt clutch hydraulics anymore), I would take a good look at their operation and possibly consider an upgrade to new.  You might want to contact the shop you had the work done at to help.

Hope that helps you.  Good  luck.

Art
Art Isaacs
AMGBA Tech Staff
chfwrench@aol.com


 

   back to AMGBA website home page or AMGBA Photo Gallery or AMGBA Club Blog